loading

OEM & ODM Services For Automobile Braking System.

Euro 7 Brake Pads: Where the Seven-Milligram Line Starts

Table of Contents

There is a table sitting inside Regulation (EU) 2024/1257, the Euro 7 regulation, and one row of it belongs to brakes. It says 7 mg/km. That is the upper limit for brake particle mass, measured as PM10, for light vehicles with a combustion engine or hybrid drive. One number. One line. If you stock or spec Euro 7 brake pads in any form, OE-feeding or aftermarket, this row is about to become part of your working week.

If you buy brake pads for a private label in Europe, you have lived with paperwork for years. You know R90. You know certificates come per part type, not per catalogue. You know approval means dyno time. So the honest question is not "what is the limit" but "does this line catch my pads, and when?"

pad-set-4pc-top
What the 7 mg/km brake dust limit actually covers

Here is where the confusion starts, and it is worth killing early. The Euro 7 brake dust limit hangs on whole-vehicle type approval. It is a number the vehicle maker has to hit on a dynamometer cycle, under the UN GTR No. 24 test procedure. It is not a number stamped on a box of pads.

The clock starts 29 November 2026 for new car and van types. Types that are already approved get a further year of grace before they have to comply. Either way, the direction is not in doubt: the vehicle industry now has a hard, measured ceiling on brake pad PM10, and it applies from late 2026.

The same regulation reaches further. Tyre wear limits follow in 2028. Brake dust comes first, and brake dust is the one your product family lives inside.

Two different doors: type approval and the aftermarket

Now the part that matters to you. Replacement pads do not go through that door. A pad sold into the European aftermarket is approved under its own regime: R90, per part type. And R90 does not currently contain a 7 mg/km dust limit.

So no, the table does not name your product. Not yet. But do not read that as "nothing changes". The limit sits on the vehicle, and the vehicle maker will push it down the supply chain. Friction suppliers who feed the OE line will reformulate. Catalogues will start carrying dust and wear data because buyers will ask for it. The aftermarket follows the OE pressure, with a lag. And the lag is where you can either get ahead or get caught.

That is the reality of euro 7 aftermarket brake pads. One sentence: the dust limit is an OE obligation today, and an aftermarket expectation tomorrow.

pad-stack-3pc
Low dust does not mean low stopping power

One fear keeps coming up in buyer conversations, so let us put it on the table. Does cutting dust mean giving up friction?

No. Dust and friction are two different curves. The 7 mg/km work targets the filler and bonding system in the friction material, the parts that turn into airborne particles at the rubbing surface. It does not mean dropping the friction grade. A pad can be reformulated to shed less PM10 and still hold its friction class through the temperature range it was built for.

That distinction is worth demanding in writing from whoever supplies you. "Low dust" as a marketing word means nothing. A measured PM10 figure, tied to a defined test, means something.

Sort your pad families before the deadline sorts them for you

Friction materials come in families, and the split matters here. In our own catalogue work we sort pads into five: semi-metallic, low-metallic, ceramic, drum, and heavy-duty. Each family answers the dust question differently, because each carries a different filler and bonding mix.

Not every pad type you sell will face the same pressure at the same time. A pad that feeds EU new-vehicle type approval lives under the 7 mg/km line right now. A pad sold into the EU aftermarket lives under R90 today and under buyer questions tomorrow. A pad sold outside the EU answers to different rules altogether.

So run the sort now, while it is cheap. Take every pad type in your range and put it in one of three buckets. Then act on each bucket differently.

Bucket 1: feeds EU new-vehicle type approval. The dust limit applies from 29 November 2026. Get the friction supplier's dust and wear data on file. Ask which formula version the type approval will run.

Bucket 2: EU aftermarket replacement. R90 still governs, per part type. No dust limit yet. Watch your OE-facing competitors; when their catalogues carry PM10 data, yours will be asked for it within a season.

Bucket 3: non-EU markets. Euro 7 does not reach here. But dust complaints, wheel-cleaning complaints and returns travel faster than regulation ever does. Low-dust options are worth quoting even where no law asks for them.

sample-pad-45deg
What to ask first, in what order

When a supplier offers you a "Euro 7 ready" pad, resist the price conversation. Ask in this order: first, which vehicle segment and which approval path this formula maps to. Second, whether dust or wear data exists for this exact formula. Price comes last, because a cheap pad with no data trail is a liability wearing a discount.

Your next move sits in the sorting, not the reading

Reading about Euro 7 changes nothing. Re-sorting your range does. Block one hour this week, list every pad type you sell, and tag each one: EU OE-feeding, EU aftermarket, or non-EU. That single list tells you who needs data files, who needs a reformulation conversation, and who is fine for now.

If your range includes pads for trucks, buses and fleet duty, the sorting gets more urgent, because those pads live closest to heavy-duty cycles. 

And when you reach the pads you cannot classify, the ones where the approval path is unclear, send us the list. From quote to sample we work in 48 hours, and from confirmed order to delivery in 7 days, so the classification conversation does not have to wait for a procurement cycle.

页底1 (2)
Common questions from distributors

Q: Does the dust limit apply to replacement pads sold after 2026?

A: Not directly. The 7 mg/km limit is written on whole-vehicle type approval, while replacement pads are approved under R90, per part type, under a separate regime. But the pressure travels: vehicle makers will pass the limit down to their friction suppliers, catalogue data will follow, and the aftermarket expectation will move with it. Treat 2026 as the start of the countdown, not the finish line.


Q: Is a low-dust pad automatically a worse pad?

A: No. Dust output and friction coefficient are separate curves. The reformulation work targets fillers and the bonding system, not the friction grade. A properly developed low-dust pad keeps its friction class across its designed temperature range.


Q: What should a distributor ask for first?

A: In this order: the vehicle segment and approval path the formula maps to; whether dust or wear data exists for that exact formula; and only then, price. A pad without a data trail cannot be defended to your own customers.

prev
Brake Hose Soft Pedal: What Was Left Out
Brake Hose Mexico: Output Is at a Record, the Fleet Is Not
next
recommended for you
Get in touch with us
Contact: Wu Xueqian
Tel: +86-18632066166
Address: Chunfeng Street, Jizhou District, Hengshui City, Heibei Province, China
Customer service