A restoration shop does not need exotic technology. It needs the correct bore, a hose that behaves like the original did when the vehicle was new, and supply that does not dry up between projects.
The JUNZE classic-vehicle hose serves that with the standard hydraulic range — the 3.2mm and 4.8mm bores cover most classic car and motorcycle applications, in fiber-braided construction to SAE J1401.
The honest position on this market: an original-specification hose, correctly made, is the product. Restorers prize correctness over novelty, and this line is deliberately conventional.Product Details
| Dimension. mm | Inch | I.D. mm | O.D. mm | Wall Thickness mm | Wall Diff Max.mm | Max Expansion ml/m 6.9MPa 10.3MPa | Burst Pressure Min.MPa | |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.25 | 0.36 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.36 | 0.48 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.45 | 0.55 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.60 | 0.8 | 70 |
| 3.2 | 1/8" | 3.35±0.15 | 9.0±0.2 | 2.92 | 0.3 | 0.45 | 0.55 | 80 |
| 4.8 | 3/16" | 4.8±0.2 | 12.5±0.3 | 3.85 | 0.3 | 1.81 | 2.36 | 60 |
| 6.3 | 1/4" | 6.1±0.2 | 15±0.4 | 3.65 | 0.3 | 2.69 | 3.84 | 50 |
Product Information
Specification runs the catalog values: ID at 3.35mm ±0.15 and 4.95mm ±0.15, outer diameters 10.5mm and 12.5mm, burst minimums of 80 MPa and 60 MPa respectively, rated -48°C to +120°C.
Supply works both ways for this market — long coils for shops that cut per chassis, or cut lengths against your length list for restoration projects that arrive one at a time.
Restoration networks tend to standardise on one supplier once the fit proves right. Send the bores and lengths your projects run and we will set the stock around them.
FAQ