Coil length looks like a trivial detail until it costs money. A roll too large for the dispensing rack gets stored badly and returns creased. A roll too small multiplies changeovers and offcut waste.
JUNZE supplies the hydraulic brake hose range in coil lengths set by the customer. The hose specification does not move — three bores, fiber braid, burst 80/60/50 MPa by bore, the catalog temperature window of -48°C to +120°C — only the length on the spool follows your storage plan.
Distributors with fixed shelf systems and workshops with fixed dispensers both plan around this detail; the supply should plan around them.Product Details
| Dimension. mm | Inch | I.D. mm | O.D. mm | Wall Thickness mm | Wall Diff Max.mm | Max Expansion ml/m 6.9MPa 10.3MPa | Burst Pressure Min.MPa | |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.25 | 0.36 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.36 | 0.48 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.45 | 0.55 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.60 | 0.8 | 70 |
| 3.2 | 1/8" | 3.35±0.15 | 9.0±0.2 | 2.92 | 0.3 | 0.45 | 0.55 | 80 |
| 4.8 | 3/16" | 4.8±0.2 | 12.5±0.3 | 3.85 | 0.3 | 1.81 | 2.36 | 60 |
| 6.3 | 1/4" | 6.1±0.2 | 15±0.4 | 3.65 | 0.3 | 2.69 | 3.84 | 50 |
Product Information
Coil lengths are quoted against order volume per bore. The dimensional specification stays constant whatever the length: ID at 3.35/4.95/6.45mm within ±0.15, OD at 10.5/12.5/15mm, wall at 3.65/3.85/3.65mm.
Spooling format follows the length — coils that dispense cleanly at your bench height, packed for the racking you run. Mixed-length pallets are available where a market carries more than one storage format.
Send the bore mix and the shelf dimensions, and the coil program returns a quote with the lengths and packing matched to both.
FAQ