A crimped joint is only as good as the match between hose and fitting. When the two come from different suppliers, every dimensional question — wall, ID tolerance, ferrule seating — becomes a negotiation between two spec sheets.
JUNZE removes that seam. The hydraulic brake hose and the end fittings come from the same production operation; the fitting line produces to drawing or sample alongside the hose line. Bundle them and the crimp specification has a single owner.
For workshops and small brands running their own crimp presses, that single-source match is usually what settles the supplier choice.Product Details
| Dimension. mm | Inch | I.D. mm | O.D. mm | Wall Thickness mm | Wall Diff Max.mm | Max Expansion ml/m 6.9MPa 10.3MPa | Burst Pressure Min.MPa | |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.25 | 0.36 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.36 | 0.48 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.45 | 0.55 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.60 | 0.8 | 70 |
| 3.2 | 1/8" | 3.35±0.15 | 9.0±0.2 | 2.92 | 0.3 | 0.45 | 0.55 | 80 |
| 4.8 | 3/16" | 4.8±0.2 | 12.5±0.3 | 3.85 | 0.3 | 1.81 | 2.36 | 60 |
| 6.3 | 1/4" | 6.1±0.2 | 15±0.4 | 3.65 | 0.3 | 2.69 | 3.84 | 50 |
Product Information
The hose side carries the catalog specification: 3.2mm, 4.8mm, and 6.3mm bores, fiber braid, burst minimums of 80/60/50 MPa, rated -48°C to +120°C under SAE J1401 and GB 16897.
The fitting side follows the same logic. JUNZE produces brake fittings as ODM and OEM parts — to drawing or to sample — covering banjo and threaded configurations for the common hydraulic positions.
Bundled supply means the two arrive matched: fitting selection checked against the bore and wall it will be crimped to. Send the routing or the sample assembly and we will quote hose and fittings as one line.
FAQ