A bulk coil serves the workshop with a crimp press. A lot of counter trade serves neither coil nor press — the customer wants the length in hand, priced and bagged, the way other brake parts sell.
JUNZE's pre-cut program turns the same SAE J1401 hydraulic hose into retail-ready stock: cut to the lengths your sales data supports, packed with bore and length marked on the bag, barcoded to your system where the order calls for it.
The program runs off your length list, not ours — the cut sheet follows what actually moves at your counter.Product Details
| Dimension. mm | Inch | I.D. mm | O.D. mm | Wall Thickness mm | Wall Diff Max.mm | Max Expansion ml/m 6.9MPa 10.3MPa | Burst Pressure Min.MPa | |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.25 | 0.36 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.36 | 0.48 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.45 | 0.55 | 80 |
| 3.2 | 1/8" | 3.35±0.15 | 10.5±0.2 | 3.65 | 0.3 | 0.60 | 0.8 | 70 |
| 3.2 | 1/8" | 3.35±0.15 | 9.0±0.2 | 2.92 | 0.3 | 0.45 | 0.55 | 80 |
| 4.8 | 3/16" | 4.8±0.2 | 12.5±0.3 | 3.85 | 0.3 | 1.81 | 2.36 | 60 |
| 6.3 | 1/4" | 6.1±0.2 | 15±0.4 | 3.65 | 0.3 | 2.69 | 3.84 | 50 |
Product Information
Pre-cut stock suits a different buyer than bulk hose, and it is worth being clear about which is which. Workshops with crimping equipment buy coils. Parts stores, online sellers, and service chains without in-house crimping buy pre-cut.
Each length is cut from the same catalog-specification hose: fiber braided, burst 80/60/50 MPa by bore, rated -48°C to +120°C, IDs at 3.35/4.95/6.45mm within ±0.15 tolerance.
Send the bore-and-length list your market sells and we will quote the pre-cut program against it, including pack format and private labelling where required.
FAQ