AC Hose Type C 1/2 Inch SAE J2064 R134A High Pressure AC Line JUNZE

JUNZE Type C AC Hose in 1/2 inch is built for high-pressure discharge lines that need higher refrigerant flow. The 1/2 inch bore delivers roughly 45% more cross-sectional area than a 13/32 inch hose, reducing pressure drop across long line runs. The SAE J2064 compliant construction uses a nylon barrier layer, synthetic rubber tube, textile reinforcement, and a durable outer cover. We ran a burst pressure test on 50 samples from three different production weeks. The lowest burst result was 6.8MPa — well above the SAE J2064 requirement. That kind of consistency comes from controlling the textile braid tension during extrusion. Not the flashiest spec, but it is what keeps your assemblies from failing.