Colored PTFE Brake Line with UV-Stable PU Coating, Custom Colors
Looks are not everything. But when you are building a show bike or a custom resto, they are not nothing either.
Our colored PTFE brake line keeps the performance and adds the finish. The 304 stainless steel braid stays tucked under a PU outer layer that comes in black, red, blue, green, orange, purple, silver, yellow, and pink. Color-matched to your build, not just close enough.
Underneath, it is the same SAE J1401 PTFE hose — no expansion, firm pedal, 14,000 PSI burst. The color coat does not change the handling. It just makes the line look like it belongs.Product Details
| Number | Inner core material | Stainless steel wire type | ID (mm) | OD (mm) | Work pressure (PSI) | Burst pressure (PSI) | Expansion (cc/ft) |
| SAEJ1401-1 | PTFE | 304 | 3.2 | 7.5 | 4660 | 14000 | 0.05 |
| SAEJ1401-2 | PTFE | 304 | 3.2 | 7.2 | 4660 | 14000 | 0.05 |
| Number | Inner core material | Stainless steel wire type | ID (mm) | ID (mm) | Work pressure (PSI) | Burst pressure (PSI) | Temp (℃) |
| SAEJ1401-3 | White core nylon | 201 | 3.2 | 7.5 | 4660 | 8000 | -40~80 |
| SAEJ1401-4 | Black core nylon 12 | 304 | 3.2 | 7.5 | 4660 | 8000 | -40~100 |
| SAEJ1401-5 | White core nylon 12 | 304 | 3.2 | 7.5 | 4660 | 14000 | -40~100 |
| SAEJ1401-6 | White core nylon | 304 | 3.2 | 7.5 | 4660 | 14000 | -40~100 |
Product Information
F. 产品详情页 (Detail Page) — 约 300 字符
The PU coat is UV-stable, so it holds its color under sun and underhood heat. It also gives the braid a smooth surface that will not chafe your frame or bodywork.
We build to length with the fittings your vehicle needs. Mixed angles, banjo or tube ends, and any of the colors in the range. Front lines, rears, clutch lines, full sets.
If you are doing a matching set across brake and clutch, we can keep the color consistent across the whole order. Tell us the color and the routing, and we will make it match. Contact JUNZE for colored PTFE brake lines.
FAQ