Motorcycle Brake Line Kit with PTFE Hose and Banjo Fittings
Stock rubber lines are fine until they get hot. Then the lever goes spongy and you lose that edge. A PTFE kit fixes it.
Our motorcycle brake line kit uses the same PTFE inner tube and 304 stainless steel braid we ship to race teams. The hose does not expand under pressure, so the lever stays firm lap after lap. Banjo fittings are machined to your model — straight, 28°, 45°, or 90°, whichever the bike needs.
Tell us your make, model, and year, and we will match the routing. Front and rear kits, single or twin lines, custom lengths. All SAE J1401 certified and pressure-tested before they ship.
Our motorcycle brake line kit uses the same PTFE inner tube and 304 stainless steel braid we ship to race teams. The hose does not expand under pressure, so the lever stays firm lap after lap. Banjo fittings are machined to your model — straight, 28°, 45°, or 90°, whichever the bike needs.
Tell us your make, model, and year, and we will match the routing. Front and rear kits, single or twin lines, custom lengths. All SAE J1401 certified and pressure-tested before they ship.
5.0
Color:
Customized (Black / Red / Blue / Green / Orange / Silver / Purple / Yellow / Pink)
Working Temputure:
-65°C to 260°C
Hose Size:
3.2mm ID (1/8")
Usage:
Brake, clutch, fuel, turbo oil, cooling, power steering systems
Type:
Brake Hose / Brake Line
Process:
PTFE extrusion → SS braiding → PU coating → Hydraulic crimping
Standard:
SAE J1401 / GB 16897-2010
Product name:
PTFE Brake Hose / Teflon Brake Hose
Certification:
DOT FMVSS 106
Payment Methods:
T/T, PayPal
Quality:
100% pressure tested, 0.05cc/ft expansion, 14,000 PSI burst verified
Package:
Standard export carton / bulk roll / custom
Material:
PTFE inner tube + 304 SS Wire Braid + PU outer layer
Application:
Automotive, motorcycle, racing, custom builds, industrial
Size:
3.2mm ID × 7.2-7.5mm OD
Shipping Options:
FedEx, DHL, Air Freight, Sea Freight, Train
Feature:
High temp resistance, zero expansion, high burst, corrosion resistant
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Product Details
特氟龙管_20
特氟龙管_08
特氟龙管_18
| Number | Inner core material | Stainless steel wire type | ID (mm) | OD (mm) | Work pressure (PSI) | Burst pressure (PSI) | Expansion (cc/ft) |
| SAEJ1401-1 | PTFE | 304 | 3.2 | 7.5 | 4660 | 14000 | 0.05 |
| SAEJ1401-2 | PTFE | 304 | 3.2 | 7.2 | 4660 | 14000 | 0.05 |
| Number | Inner core material | Stainless steel wire type | ID (mm) | ID (mm) | Work pressure (PSI) | Burst pressure (PSI) | Temp (℃) |
| SAEJ1401-3 | White core nylon | 201 | 3.2 | 7.5 | 4660 | 8000 | -40~80 |
| SAEJ1401-4 | Black core nylon 12 | 304 | 3.2 | 7.5 | 4660 | 8000 | -40~100 |
| SAEJ1401-5 | White core nylon 12 | 304 | 3.2 | 7.5 | 4660 | 14000 | -40~100 |
| SAEJ1401-6 | White core nylon | 304 | 3.2 | 7.5 | 4660 | 14000 | -40~100 |
Product Information
Fitting angles matter more on a bike than a car. Clearance is tight around the forks and caliper. We offer straight, 28°, 45°, and 90° banjo ends, and we can mix them — straight at the master, 90° at the caliper.
Color is your call too. Black, silver, red, blue, or whatever the build calls for. The PU outer layer keeps the braid from chafing the frame.
Every kit comes with the banjo bolts and washers you need. No chasing down hardware. If you are not sure which angles your bike uses, send us a photo or your VIN and we will sort it. Contact JUNZE for your motorcycle brake line kit.
FAQ
1
Q : What standards does JUNZE PTFE brake hose meet?
A : All hoses are manufactured to SAE J1401 and GB 16897-2010 standards. They comply with DOT FMVSS 106 requirements for the US market. Each hose is pressure-tested before shipment.
2
Q : Can I get custom lengths and fittings?
A : Yes. Custom lengths from 400mm to 2400mm are available. Fitting options include straight, 28°, 45°, and 90° banjo configurations. Choose your core material, braid type, fitting type, and color — we assemble and pressure-test before shipping.
3
Q : Is this hose compatible with all brake fluids?
A : Yes. The PTFE inner tube is compatible with DOT 3, DOT 4, DOT 5.1, and DOT 5 silicone-based brake fluids. It also handles fuel, oil, methanol, and water, making it suitable for clutch, fuel, and turbo oil line applications.
4
Q : What is the MOQ?
A : Bulk hose MOQ varies by size and quantity. Contact us for volume pricing and OEM contract terms.
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Get in Touch With Us
We always adhere to the concept of "safety first, quality oriented" and aspire to become a trusted brake system partner in the global auto parts market.
Contact: Wu Xueqian
Tel: +86-18632066166
E-mail: info@jzhose.com
Address: Chunfeng Street, Jizhou District, Hengshui City, Heibei Province, China