loading

OEM & ODM Services For Automobile Braking System.

Hydraulic Brake Hose

Hydraulic brake hose is a critical safety component in modern automotive braking systems. It is a rigid channel used in the automotive brake system to transmit brake fluid pressure. These hoses are designed with multiple layers, providing durability and safety. They typically consist of a synthetic rubber inner tube for fluid compatibility, reinforced with high-strength fabric or steel weave, and a durable, wear-resistant outer layer to prevent wear and environmental damage. Common specifications include an inner diameter of 3.2mm, designed to meet strict international standards such as SAE J1401 and GB16897. The typical working pressure exceeds 49 MPa, and the working temperature range is from -40 ° C to+120 ° C. Hydraulic brake pipes usually have excellent corrosion resistance, fracture resistance and aging resistance, and can work stably in such complex and harsh environment as vehicle chassis for a long time.

Send your inquiry
High-Temp Hydraulic Brake Hose Rated to +120°C JUNZE
Engine bays keep getting tighter and hotter, and the brake hose routed through them notices. JUNZE's hydraulic brake hose is rated to +120°C at the top of its window — a catalog figure, tested under SAE J1401. Fiber braided, three bores, -48°C low end. GB 16897.
Motorcycle Hydraulic Brake Hose Coil, 3.2mm ID, JUNZE
Motorcycle brake systems run the 3.2mm bore almost universally, and a bulk coil serves that market efficiently. JUNZE's 3.2mm hydraulic brake hose runs fiber braid with 80 MPa burst minimum, rated -48°C to +120°C. SAE J1401 and GB 16897. Cut to length per bike.
1/4 Inch Hydraulic Brake Hose Coil for Pickups and Vans JUNZE
Loaded pickups and vans displace more fluid per stop, and the 1/4 inch bore answers that. JUNZE's 6.3mm ID hydraulic brake hose coil runs multi-strand fiber braid, 50 MPa burst minimum, rated -48°C to +120°C. SAE J1401 and GB 16897. Supplied in coils for workshop cutting.
Low Expansion Hydraulic Brake Hose High Pressure SAE J1401 Performance Grade JUNZE
Low expansion hydraulic brake hose for improved pedal feel. SAE J1401 certified, high pressure rating, performance grade construction for demanding applications.
Hydraulic Brake Hose Assembly with Fittings for Passenger Car Direct Replacement JUNZE
Ready-to-install hydraulic brake hose assembly with pre-crimped fittings for passenger cars. SAE J1401 standard, direct OE replacement, multiple thread options.
EPDM Hydraulic Brake Hose Bulk SAE J1401 Synthetic Rubber 3.2mm 4.8mm JUNZE
Bulk EPDM hydraulic brake hose in 3.2mm and 4.8mm ID. SAE J1401 certified, synthetic rubber construction. Ideal for assembly manufacturing and wholesale supply.
SAE J1401 Hydraulic Brake Hose 4.8mm ID Heavy Duty for SUV MPV JUNZE
Heavy duty SAE J1401 hydraulic brake hose with 4.8mm inner diameter. Dual-layer reinforcement, higher flow capacity for SUV and MPV applications.
SAE J1401 Hydraulic Brake Hose 3.2mm ID EPDM Rubber for Passenger Car JUNZE
SAE J1401 hydraulic brake hose, 3.2mm inner diameter, EPDM rubber construction. Compatible with DOT3 and DOT4 fluid. Suitable for passenger car brake systems.
Hydraulic Brake Hose New Multiple Sizes DOT3/DOT4 Compatible
High-pressure hydraulic brake hose, safe and durable, excellent oil resistance and sealing, for automotive brake systems.
Hydraulic Brake Hose Replacement Parts for Car EPDM+PVA Material
High-pressure hydraulic brake hose, safe and durable, excellent oil resistance and sealing, for automotive brake systems.

Brake Hose Construction: How Reinforcement Layers Support Reliable Performance

Automotive brake hoses combine an inner rubber tube, reinforcement and an outer protective cover. Each layer performs a specific function in fluid transmission, pressure resistance and protection against external exposure.

JUNZE hydraulic brake hose cross section showing rubber inner tube and fiber reinforcement
Cross-section view of JUNZE reinforced hydraulic brake hose.

Three Main Construction Layers

01. Rubber Inner Tube

The inner tube forms the passage for hydraulic brake fluid. Its material must be suitable for the specified brake fluid and operating conditions.

02. Multi-Strand Fiber Reinforcement

The braided fiber reinforcement helps the hose withstand internal hydraulic pressure while maintaining its flexible construction.

03. Ozone-Resistant Rubber Cover

The outer cover protects the hose body and reinforcement against environmental exposure, including ozone and external wear.

Why Does Reinforced Construction Matter?

Brake hoses operate in environments involving pressure changes, temperature fluctuations and vehicle movement. The inner tube, reinforcement and outer cover must work together. When evaluating a hydraulic brake hose manufacturer, buyers should check the material construction, dimensional consistency and relevant performance test documentation rather than judging the product by its external appearance alone.

Hydraulic vs. Air Brake Hoses: Which Type Does Your Vehicle System Require?

Hydraulic brake hoses and air brake hoses serve different braking systems. The key distinction is their working medium: hydraulic hoses transfer brake fluid, while air brake hoses carry compressed air.

HYDRAULIC BRAKING SYSTEM

Hydraulic Brake Hose

Transfers pressurized brake fluid between rigid brake lines and hydraulic braking components such as calipers or wheel cylinders.

Typical applications: Passenger cars, motorcycles and vehicles equipped with hydraulic braking systems.

PNEUMATIC BRAKING SYSTEM

Air Brake Hose

Carries compressed air through pneumatic braking circuits to operate air brake components.

Typical applications: Heavy-duty trucks, buses, trailers and other commercial vehicles equipped with air brakes.

Comparison Hydraulic Brake Hose Air Brake Hose
Working medium Brake fluid Compressed air
Brake system Hydraulic braking Pneumatic braking
Common vehicle applications Passenger cars and motorcycles Trucks, buses and trailers
Relevant standard reference SAE J1401 SAE J1402
Important selection factors Fluid compatibility, bore, pressure, temperature and fittings Air pressure, temperature, dimensions and connections

Important for buyers: These two hose types are not interchangeable. SAE J1401 and SAE J1402 address different product applications. Always confirm the vehicle braking system and applicable product specifications before placing a bulk order.

Hydraulic Brake Hose Specifications and Quality Checks for Bulk Buyers

For automotive brake hose sourcing, buyers need to verify more than the nominal diameter. Inner diameter, outer diameter, wall thickness, burst pressure and product identification all contribute to specification control.

JUNZE hydraulic brake hoses in different diameters with visible reinforced cross sections
Hydraulic brake hose samples showing different diameters and reinforced construction.

Available Hydraulic Brake Hose Sizes

Our hydraulic brake hose catalogue includes nominal bore options of 3.2mm, 4.8mm and 6.3mm. The appropriate specification must be confirmed against the intended application and the detailed product dimensions.

The following figures are taken from our published hydraulic brake hose dimensional specifications. They should be checked against the selected model before order approval.

Nominal Bore Listed ID (mm) OD (mm) Wall Thickness (mm) Minimum Burst Pressure (MPa)
3.2mm (1/8") 3.35 ± 0.15 10.5 ± 0.2 3.65 80
4.8mm (3/16") 4.8 ± 0.2 12.5 ± 0.3 3.85 60
6.3mm (1/4") 6.1 ± 0.2 15 ± 0.4 3.65 50

Note: These are published catalogue dimensional and minimum burst-pressure figures for the listed hydraulic hose specifications. Minimum burst pressure is not the same as working pressure. Confirm the exact model, test conditions and applicable product documentation before using these figures for engineering approval.

Product Marking and Traceability

Product markings provide useful identification information for buyers and distributors. During incoming inspection, check the hose markings against the approved product specification, including the declared standard and relevant product identification details.

JUNZE hydraulic brake hose surface markings showing product and standard identification
Printed identification markings on hydraulic brake hose.

Four Quality Checks Before Approving a Bulk Order

01

Dimensional Inspection

Check inner diameter, outer diameter, wall thickness and dimensional tolerances against the approved specification.

02

Construction Verification

Verify the inner rubber tube, fiber reinforcement and outer cover against the specified construction.

03

Performance Testing

Review relevant pressure and performance test records, including burst-pressure requirements where applicable.

04

Marking and Batch Consistency

Check product identification, packaging and batch records against the approved sample and purchase specifications.

Brake Hose Purchasing and Technical FAQs

These answers address practical questions about hydraulic brake hose construction, specification verification, product standards and quality management for automotive parts distributors, importers and bulk buyers.

1. When should a vehicle use a flexible brake hose instead of a rigid brake line?

Flexible brake hoses are generally used where relative movement occurs between vehicle components, such as between the body and moving suspension or steering assemblies. Rigid brake lines are used along sections that do not require the same flexibility. When sourcing replacement hoses, confirm the original routing, connection positions and required hose length. The replacement must accommodate the intended vehicle movement without excessive bending, twisting or contact with nearby components.

2. Why should buyers check both inner and outer diameters when selecting hydraulic brake hoses?

Inner diameter identifies the internal passage, while outer diameter and wall thickness affect the overall hose dimensions and installation compatibility. A hose with the correct nominal bore may still differ in its external dimensions. For replacement and assembly projects, compare the full dimensional specification rather than selecting by inner diameter alone. This is particularly important for distributors purchasing several hose sizes for different vehicle applications.

3. Does a higher burst pressure automatically mean a better hydraulic brake hose?

No. Minimum burst pressure is one performance indicator, not a complete measure of brake hose quality. Buyers should also evaluate pressure expansion, dimensional consistency, temperature resistance, material compatibility and the applicable performance standard. A hose must satisfy the requirements of its intended application. Selecting a product based only on the highest burst-pressure figure may overlook other important operating and compliance requirements.

4. Can hydraulic brake hoses rated from -48°C to +120°C be used in every vehicle environment?

The published -48°C to +120°C range applies to the specified JUNZE hydraulic brake hose catalogue products. It should not automatically be applied to every hose model or vehicle application. Buyers should compare the actual operating temperature, brake fluid compatibility, installation location and relevant product documentation before selecting a hose. Temperature suitability must be evaluated together with the other performance requirements.

5. Why is ozone resistance important for brake hoses stored by automotive parts distributors?

Brake hoses can be exposed to environmental conditions during storage and distribution, even before installation. Ozone exposure can contribute to deterioration of susceptible rubber surfaces. An ozone-resistant outer cover helps protect the hose against this type of environmental exposure. Distributors should also follow suitable storage practices and inspect packaging and hose surfaces before releasing products for sale.

6. How can importers distinguish SAE J1401 hydraulic brake hoses from SAE J1402 air brake hoses?

The first step is to identify the braking system. SAE J1401 relates to hydraulic brake hose assemblies for road vehicles using specified non-petroleum-base hydraulic brake fluids. SAE J1402 addresses automotive air brake hoses. Buyers should check the declared product type, markings, technical specifications and supporting test documentation. These standards address different applications and should not be treated as interchangeable when purchasing mixed automotive hose products.

7. What should distributors inspect when receiving a new batch of hydraulic brake hoses?

Start by comparing the delivered product with the approved specification and sample. Check hose dimensions, external surface condition, printed identification, packaging and product quantity. Review the relevant inspection and performance test records, including pressure-related results where required. For repeat purchasing, maintaining approved samples and consistent product identification helps reduce specification differences between batches.

8. What manufacturing stages should buyers understand when evaluating a hydraulic brake hose supplier?

The published JUNZE hydraulic brake hose process includes rubber extrusion, multi-strand fiber braiding, vulcanization and coiling. For finished brake hose assemblies, fitting connection and crimping are additional operations. Understanding these stages helps purchasing teams evaluate whether a supplier can control the hose construction and, where assemblies are required, the connection process. Buyers should request relevant process and inspection documentation when evaluating a new supplier.

9. Which documents should overseas buyers request when importing brake hoses for regulated markets?

The required documentation depends on the destination market, product type and purchasing contract. Buyers should identify the applicable product standard, request relevant conformity or certification documents where applicable, and verify product-specific test records and dimensional specifications. For JUNZE's listed hydraulic brake hose range, the product information identifies SAE J1401, GB 16897, CCC (3C) and CQC. The specific document scope and validity should be confirmed for the product and destination market before shipment.

10. How can automotive parts wholesalers maintain consistent brake hose specifications across repeat orders?

Wholesalers should maintain an approved specification for each product model, including nominal bore, actual dimensions, material construction, pressure requirements, temperature range and applicable standards. Keep reference samples, product drawings and packaging details where relevant. Before confirming repeat orders, compare the current production specification with the approved version and document any changes. At JUNZE, we manufacture hydraulic brake hoses and support bulk supply for automotive and motorcycle applications. Product specifications and order arrangements can be confirmed with our team before production.

Explore Related Brake Hose Products

Explore our related automotive brake hose products to identify the appropriate hose type, connection components and finished assemblies for your sourcing requirements.

Contact: Wu Xueqian
Tel: +86-18632066166
Address: Chunfeng Street, Jizhou District, Hengshui City, Heibei Province, China
Customer service